Programs
Courses Summary
Coded Welder program are designed to help create a skilled and competent workforce. Our training covers the main arc welding processes that are used by industry, including SMAW, GTAW, GMAW and FCAW. Welder qualification tests are witnessed by CIDB approved welding examiners and conducted in line with recognized international standards.
The course provides a full appreciation in the techniques and method of Penetrant Inspection. This includes Introduction to penetrant method, Principle of penetrant testing, Penetrant inspection equipment, Performance check, Defect detection and evaluation, Penetrant techniques, relevant standard and hands-on practical.
Blasting and Painting Technician (Level 1 & 2) is designed to satisfy the needs of the Malaysia Oil and Gas, Exploration and Production industry. The scheme is aimed at improving the quality of workmanship resulting in stronger confidence of higher quality painting and lower overall cost. This aspect is in line with ISO 9001 process control and also reduces micro inspection. This is in accordance with SIJIL KOMPETENSI KEMAHIRAN PEMBINAAN (SKKP) CIDB (AKTA 520) mandatory requirement.
Youth Program
Welding
Non-Destructive Testing
Blasting & Painting
Welding
Welding program is designed to help create a skilled and competent workforce. Our training covers the main arc welding processes that are used by industry including SMAW, GTAW, GMAW and FCAW. Welder qualification tests are witnessed by CIDB approved welding examiners and conducted in line with recognized international standards.
SHIELDED METAL ARC WELDING (SMAW)
Course Information
During the course, the candidates will gain a comprehensive understanding in welding safety with an overview of basic weld symbols, SMAW electrode types and selection, classification of electrodes, power sources and polarity.
Course content
- Introduction to workplace / workshop safety and health practice and basic first aid
- Arc welding safety
- Shielded Metal Arc Welding (SMAW) process
- Welding simulator training
- Welding consumable
- Welding imperfection, residual stress and distortion
- Welding terminology and definition
- Welding procedure specification (WPS)/ welder qualification
- Welding symbol
Welding Courses Offered
Level 1 – 1F, 1G, 2F, 2G, 3F, 4F
Level 2 – 3G, 4G
Level 3 – 5G, 6G, 6GC, 6GR
Pre-Requisites
• Malaysia age between 17 to 35 years old
• Completed Form 3 at Secondary school
• Able to read, write and count
• Medically and physically fit
• No prior enrollment under Youth Skills Competency Training Program
GAS TUNGSTEN ARC WELDING (GTAW)
Course Information
During the course, the candidates will gain a comprehensive understanding in GTAW welding safety and the GTAW processes. This includes acquiring the knowledge of power sources and polarities, principles of operation, welding techniques, electrode identification and use, filler metal identification and use, welding code, and maintenance of GTAW equipment and accessories.
Course content
- Introduction to workplace / workshop safety and health practice and basic first aid
- Arc welding safety
- Gas Tungsten Arc Welding (GTAW) process
- Welding simulator training
- Welding consumable
- Welding imperfection, residual stress and distortion
- Welding terminology and definition
- Welding procedure specification (WPS)/ welder qualification
- Welding symbol
Welding Courses Offered
Level 1 – 1F, 1G, 2F, 2G, 3F, 4F
Level 2 – 3G, 4G
Level 3 – 5G, 6G, 6GC
Pre-Requisites
• Malaysia age between 17 to 35 years old
• Completed Form 3 at Secondary school
• Able to read, write and count
• Medically and physically fit
• No prior enrollment under Youth Skills Competency Training Program
GAS METAL ARC WELDING (GMAW)
Course Information
During the course, the candidates will gain a comprehensive understanding in GMAW welding safety and the GMAW processes. This includes acquiring the knowledge of power sources and polarities, principles of operation, welding techniques, modes of filler metal transfer, filler metal identification and use, welding code, and maintenance of GMAW equipment.
Course content
- Introduction to workplace / workshop safety and health practice and basic first aid
- Arc welding safety
- Gas Metal Arc Welding (GMAW) process
- Welding simulator training
- Welding consumable
- Welding imperfection, residual stress and distortion
- Welding terminology and definition
- Welding procedure specification (WPS)/ welder qualification
- Welding symbol
Welding Courses Offered
Level 1 – 1F, 1G, 2F, 2G, 3F, 4F
Level 2 – 3G, 4G
Level 3 – 5G, 6G
Pre-Requisites
• Malaysia age between 17 to 35 years old
• Completed Form 3 at Secondary school
• Able to read, write and count
• Medically and physically fit
• No prior enrollment under Youth Skills Competency Training Program
FLUX CORED ARC WELDING (FCAW)
Course Information
During the course, the candidates will gain a comprehensive understanding in FCAW welding safety and the FCAW process. This includes acquiring the knowledge and techniques of flux cored arc welding, both self-shielded and gas-shielded, power sources and polarities, principles of operation, welding techniques, modes of filler metal transfer, filler metal identification and use, code welding, and maintenance of FCAW equipment.
Course content
- Introduction to workplace / workshop safety and health practice and basic first aid
- Arc welding safety
- Flux Cored Arc Welding (FCAW) process
- Welding simulator training
- Welding consumable
- Welding imperfection, residual stress and distortion
- Welding terminology and definition
- Welding procedure specification (WPS)/ welder qualification
- Welding symbol
Welding Courses Offered
Level 1 – 1F, 1G, 2F, 2G, 3F, 4F
Level 2 – 3G, 4G
Level 3 – 5G, 6G
Pre-Requisites
• Malaysia age between 17 to 35 years old
• Completed Form 3 at Secondary school
• Able to read, write and count
• Medically and physically fit
• No prior enrollment under Youth Skills Competency Training Program
Non-Destructive Testing
The program offers intensive practical training together with strong theoretical foundation that enables personnel to achieve a solid understanding of Non-destructive testing program. Designed to create competent NDT personnel in methods of PT, MT, RI and UT in accordance with ISO 9712.
PENETRANT TESTING (PT)
Course Information
Penetrant Testing (PT) is one of the non-destructive testing (NDT) methods used for the detection of surface breaking imperfections. The Penetrant Testing method is based on the capillary action of liquids. It employs various chemicals which must be used in accordance with a prescribed procedure. This method is known for its simplicity and relative effectiveness. It belongs to the group of conventional NDT methods.
During the course, the candidates will gain a comprehensive understanding of Penetrant Testing principles that will enable them to implement this method competently.
Course content
- Introduction of terminology and history of NDT
- Physical properties of the penetrant and associated knowledge
- Typical defects according to the manufacturing process
- Design and operation of penetrant installations and units
- Verification that the test object is in suitable condition for penetrant testing
- Preparation and performance of the test
- Test report (preparation and check) and written procedure
- Assessment of discontinuities
- Environmental and safety conditions
Training Program
- Magnetic Testing (MT) + Penentrant Testing (PT)
- Magnetic Testing (MT) + Ultrasonic Testing Thickness Measurement (UTTM)
Pre-Requisites
- Malaysian age between 17 to 35 years old
- Certified with Sijil Pelajaran Malaysia (SPM) with credit in 3 subjects (Mathematic, Physics and English)
- Preferable Diploma holder in Engineering / Technology
- Pass the Pre-course Test and program admission interview
- Physically fit and and pass color eye test
MAGNETIC TESTING (MT)
Course Information
Magnetic Particle Testing (MT) is one of the Non-Destructive Testing (NDT) methods used for the detection of surface or subsurface imperfections. The Magnetic Particle Testing method is based on the ability of a material to be magnetized. Material discontinuities (if oriented suitably) may lead to magnetic flux leakage that forms an indication. This method is known for its speed, productivity, and relative accuracy. It belongs to the group of conventional NDT methods.
During the course candidates will gain a comprehensive understanding of Magnetic Particle Testing principles that will enable them to implement this method competently.
Course content
- Introduction of terminology and history of NDT
- Physical properties of the magnetic testing and associated knowledge
- Product knowledge; capabilities of magnetic testing method and its derivate techniques
- Magnetic Testing Equipment
- Information prior to the test
- Preparation and performance of the test
- Test report (preparation and check) and written procedure
- Evaluation and reporting
- Assessment
- Quality aspects
- Environmental and Safety conditions
Training Program
- Magnetic Testing (MT) + Penentrant Testing (PT)
- Magnetic Testing (MT) + Ultrasonic Testing Thickness Measurement (UTTM)
Pre-Requisites
- Malaysian age between 17 to 35 years old
- Certified with Sijil Pelajaran Malaysia (SPM) with credit in 3 subjects (Mathematic, Physics and English)
- Preferable Diploma holder in Engineering / Technology
- Pass the Pre-course Test and program admission interview
- Physically fit and and pass color eye test
ULTRASONIC TESTING THICKNESS MEASUREMENT (UTTM)
Course Information
Ultrasonic Testing Thickness Measurement (UTTM) is one of the Non-Destructive Testing methods used for detection of defects (lamination or corrosion) inside materials or thickness check by the use of compression probe. The Ultrasonic Testing method uses acoustic waves which have the capability to propagate through a material and be reflected on its boundary. It employs ultrasonic test sets and various probes. This method is one of volumetric methods (can test full material volume). It belongs to the group of conventional NDT methods.
During the course the candidate will gain a comprehensive understanding of Ultrasonic Testing that will enable them to implement this method competently.
Course content
- Introduction of terminology and history of NDT
- Physical properties of the ultrasonic testing and associated knowledge
- Product knowledge; capabilities of ultrasonic testing method and its derivate techniques
- Ultrasonic Testing Equipment
- Information prior to the test
- Preparation and performance of the test
- Test report (preparation and check) and written procedure
- Evaluation and reporting
- Assessment
- Quality aspects
Training Program
- Magnetic Testing (MT) + Penentrant Testing (PT)
- Magnetic Testing (MT) + Ultrasonic Testing Thickness Measurement (UTTM)
Pre-Requisites
- Malaysian age between 17 to 35 years old
- Certified with Sijil Pelajaran Malaysia (SPM) with credit in 3 subjects (Mathematic, Physics and English)
- Preferable Diploma holder in Engineering / Technology
- Pass the Pre-course Test and program admission interview
- Physically fit and and pass color eye test
ULTRASONIC TESTING (UT)
Course Information
Ultrasonic Testing (UT) is one of the non-destructive testing (NDT) methods used for detection of defects inside materials or welds by the use of compression and shear probe. The Ultrasonic Testing method uses acoustic waves which have the capability to propagate through a material and be reflected on its boundary. It employs ultrasonic test sets and various probes. This method is one of volumetric methods (can test full material volume). It belongs to the group of conventional NDT methods.
During the course the candidate will gain a comprehensive understanding of Ultrasonic Testing that will enable them to implement this method competently. This will be achieved through both theory lessons focused on aspects of practical application of UT and practical exercises on test specimens, with emphasis on interpretation of defect indications.
Course content
- Introduction of terminology and history of NDT
- Physical properties of the ultrasonic testing and associated knowledge
- Product knowledge; capabilities of ultrasonic testing method and its derivate techniques
- Ultrasonic Testing Equipment
- Information prior to the test
- Preparation and performance of the test
- Test report (preparation and check) and written procedure
- Evaluation and reporting
- Assessment
- Quality aspects
Training Program
- Magnetic Testing (MT) + Penentrant Testing (PT)
- Magnetic Testing (MT) + Ultrasonic Testing Thickness Measurement (UTTM)
Pre-Requisites
- Malaysian age between 17 to 35 years old
- Certified with Sijil Pelajaran Malaysia (SPM) with credit in 3 subjects (Mathematic, Physics and English)
- Preferable Diploma holder in Engineering / Technology
- Pass the Pre-course Test and program admission interview
- Physically fit and and pass color eye test
RADIOGRAPHIC INTERPRETATION (RI)
Course Information
Radiographic Interpreter (RI) is a limited qualification related to radiographic testing, a method used for detection of internal material defects. The qualified Radiographic Interpreter should have the skill to interpret and evaluate a radiographic image in term of image quality as well as object acceptability. This includes being able to identify indications correctly, recognize the nature of a defect, measure relevant dimensions and record position so that if the defect is considered unacceptable, it may be located on the object and remedial action taken.
During the course the candidate will gain a comprehensive understanding of the Radiographic Testing method that will enable them to understand radiographic images.
Course content
- Introduction of terminology and history of NDT
- Physical properties of the radiographic testing and associated knowledge
- Geometry for radiographic exposures
- Product knowledge; capabilities of radiographic testing method and its derivate techniques
- Design and operation of X-ray machines and Gamma ray devices
- Developing process
- Examination of welded joints according to ISO standards
- Image quality
- Test report (preparation and check)
- Evaluation and reporting
- Assessment and Quality aspects
Training Program
- Magnetic Testing (MT) + Penentrant Testing (PT)
- Magnetic Testing (MT) + Ultrasonic Testing Thickness Measurement (UTTM)
Pre-Requisites
- Malaysian age between 17 to 35 years old
- Certified with Sijil Pelajaran Malaysia (SPM) with credit in 3 subjects (Mathematic, Physics and English)
- Preferable Diploma holder in Engineering / Technology
- Pass the Pre-course Test and program admission interview
- Physically fit and and pass color eye test
Blasting & Painting Operator
During the course, the candidates will gain a comprehensive understanding of safety rules and risk assessment, equipment checks, material and consumables, personal protective equipment required, set up equipment and proper techniques of blasting and painting. The certification will be executed in accordance with NOSS Standard F433-004-2.
BLASTING PAINTING OPERATOR (BPO)
Course content
- Blasting Preparation
- Abrasive blasting operation
- Blasting material and equipment storage handling
- Painting preparation
- Protective coating and painting
- Painting material and equipment storage handling
Pre-Requisites
- Malaysia age between 17 to 35 years old
- Completed Form 3 Secondary school
- Able to read and write Physically fit and pass color eye test
- No prior enrollment under CIDB Youth Skills Competency Training Program
Personnel Program
Welding
Non-Destructive Testing
Blasting & Painting
Welding
Welding program is designed to help create a skilled and competent workforce. Our training covers the main arc welding processes that are used by industry including SMAW, GTAW, GMAW and FCAW. Welder qualification tests are witnessed by CIDB approved welding examiners and conducted in line with recognized international standards.
SHIELDED METAL ARC WELDING (SMAW)
Course Information
During the course, the candidates will gain a comprehensive understanding in welding safety with an overview of basic weld symbols, SMAW electrode types and selection, classification of electrodes, power sources and polarity.
Course content
- Introduction to workplace / workshop safety and health practice and basic first aid
- Arc welding safety
- Shielded Metal Arc Welding (SMAW) process
- Welding simulator training
- Welding consumable
- Welding imperfection, residual stress and distortion
- Welding terminology and definition
- Welding procedure specification (WPS)/ welder qualification
- Welding symbol
Welding Courses Offered
Level 1 – 1F, 1G, 2F, 2G, 3F, 4F
Level 2 – 3G, 4G
Level 3 – 5G, 6G, 6GC, 6GR
Pre-Requisites
- Malaysia age between 18 to 55 years old
- Own a valid Kad Pendaftaran Personel Binaan (Pekerja Binaan Am, Pekerja Binaan Separuh Mahir atau Pekerja Binaan Mahir)
- Able to read, write and count
- At least six (6) months working experience in related field or certified in 1G/2G Welding for Level 2 or certified in 3G Welding for Level 3 from technical colleges or industry
- Medically and physically fit
GAS TUNGSTEN ARC WELDING (GTAW)
Course Information
During the course, the candidates will gain a comprehensive understanding in GTAW welding safety and the GTAW processes. This includes acquiring the knowledge of power sources and polarities, principles of operation, welding techniques, electrode identification and use, filler metal identification and use, welding code, and maintenance of GTAW equipment and accessories.
Course content
- Introduction to workplace / workshop safety and health practice and basic first aid
- Arc welding safety
- Gas Tungsten Arc Welding (GTAW) process
- Welding simulator training
- Welding consumable
- Welding imperfection, residual stress and distortion
- Welding terminology and definition
- Welding procedure specification (WPS)/ welder qualification
- Welding symbol
Welding Courses Offered
Level 1 – 1F, 1G, 2F, 2G, 3F, 4F
Level 2 – 3G, 4G
Level 3 – 5G, 6G, 6GC
Pre-Requisites
- Malaysia age between 18 to 55 years old
- Own a valid Kad Pendaftaran Personel Binaan (Pekerja Binaan Am, Pekerja Binaan Separuh Mahir atau Pekerja Binaan Mahir)
- Able to read, write and count
- At least six (6) months working experience in related field or certified in 1G/2G Welding for Level 2 or certified in 3G Welding for Level 3 from technical colleges or industry
- Medically and physically fit
GAS METAL ARC WELDING (GMAW)
Course Information
During the course, the candidates will gain a comprehensive understanding in GMAW welding safety and the GMAW processes. This includes acquiring the knowledge of power sources and polarities, principles of operation, welding techniques, modes of filler metal transfer, filler metal identification and use, welding code, and maintenance of GMAW equipment.
Course content
- Introduction to workplace / workshop safety and health practice and basic first aid
- Arc welding safety
- Gas Metal Arc Welding (GMAW) process
- Welding simulator training
- Welding consumable
- Welding imperfection, residual stress and distortion
- Welding terminology and definition
- Welding procedure specification (WPS)/ welder qualification
- Welding symbol
Welding Courses Offered
Level 1 – 1F, 1G, 2F, 2G, 3F, 4F
Level 2 – 3G, 4G
Level 3 – 5G, 6G
Pre-Requisites
- Malaysia age between 18 to 55 years old
- Own a valid Kad Pendaftaran Personel Binaan (Pekerja Binaan Am, Pekerja Binaan Separuh Mahir atau Pekerja Binaan Mahir)
- Able to read, write and count
- At least six (6) months working experience in related field or certified in 1G/2G Welding for Level 2 or certified in 3G Welding for Level 3 from technical colleges or industry
- Medically and physically fit
FLUX CORED ARC WELDING (FCAW)
Course Information
During the course, the candidates will gain a comprehensive understanding in FCAW welding safety and the FCAW process. This includes acquiring the knowledge and techniques of flux cored arc welding, both self-shielded and gas-shielded, power sources and polarities, principles of operation, welding techniques, modes of filler metal transfer, filler metal identification and use, code welding, and maintenance of FCAW equipment.
Course content
- Introduction to workplace / workshop safety and health practice and basic first aid
- Arc welding safety
- Flux Cored Arc Welding (FCAW) process
- Welding simulator training
- Welding consumable
- Welding imperfection, residual stress and distortion
- Welding terminology and definition
- Welding procedure specification (WPS)/ welder qualification
- Welding symbol
Welding Courses Offered
Level 1 – 1F, 1G, 2F, 2G, 3F, 4F
Level 2 – 3G, 4G
Level 3 – 5G, 6G
Pre-Requisites
- Malaysia age between 18 to 55 years old
- Own a valid Kad Pendaftaran Personel Binaan (Pekerja Binaan Am, Pekerja Binaan Separuh Mahir atau Pekerja Binaan Mahir)
- Able to read, write and count
- At least six (6) months working experience in related field or certified in 1G/2G Welding for Level 2 or certified in 3G Welding for Level 3 from technical colleges or industry
- Medically and physically fit
Non-Destructive Testing
The program offers intensive practical training together with strong theoretical foundation that enables personnel to achieve a solid understanding of Non-destructive testing program. Designed to create competent NDT personnel in methods of PT, MT, RI and UT in accordance with ISO 9712.
PENETRANT TESTING (PT)
Course Information
Penetrant Testing (PT) is one of the non-destructive testing methods used for the detection of surface breaking imperfections. The Penetrant Testing method is based on the capillary action of liquids. It employs various chemicals which must be used in accordance with a prescribed procedure. This method is known for its simplicity and relative effectiveness. It belongs to the group of conventional NDT methods.
During the course, the candidates will gain a comprehensive understanding of Penetrant Testing principles that will enable them to implement this method competently.
Course content
- Introduction of terminology and history of NDT
- Physical properties of the penetrant and associated knowledge
- Typical defects according to the manufacturing process
- Design and operation of penetrant installations and units
- Verification that the test object is in suitable condition for penetrant testing
- Preparation and performance of the test
- Test report (preparation and check) and written procedure
- Assessment of discontinuities
- Environmental and safety conditions
Training Program
Magnetic Testing (MT)
Penetrant Testing (PT)
Ultrasonic Testing Thickness Measurement (UTTM)
Ultrasonic Testing in Welds (UT)
Radiographic Interpretation (RI)
Pre-Requisites
- Malaysian age between 18 to 55 years old
- Certified with Sijil Pelajaran Malaysia (SPM) with credit in 3 subjects (Mathematic, Physics and English)
- Preferable Diploma holder in Engineering /Technology
- Pass the Pre-course Test and program admission interview
- Physically fit and and pass color eye test
- At least six (6) months working experience in related field as per below schedule :
MAGNETIC TESTING (MT)
Course Information
Magnetic Particle Testing (MT) is one of the Non-Destructive Testing (NDT) methods used for the detection of surface or subsurface imperfections. The Magnetic Particle Testing method is based on the ability of a material to be magnetized. Material discontinuities (if oriented suitably) may lead to magnetic flux leakage that forms an indication. This method is known for its speed, productivity, and relative accuracy. It belongs to the group of conventional NDT methods.
During the course candidates will gain a comprehensive understanding of Magnetic Particle Testing principles that will enable them to implement this method competently.
Course content
- Introduction of terminology and history of NDT
- Physical properties of the magnetic testing and associated knowledge
- Product knowledge; capabilities of magnetic testing method and its derivate techniques
- Magnetic Testing Equipment
- Information prior to the test
- Preparation and performance of the test
- Test report (preparation and check) and written procedure
- Evaluation and reporting
- Assessment
- Quality aspects
- Environmental and Safety conditions
Training Program
Magnetic Testing (MT)
Penetrant Testing (PT)
Ultrasonic Testing Thickness Measurement (UTTM)
Ultrasonic Testing in Welds (UT)
Radiographic Interpretation (RI)
Pre-Requisites
- Malaysian age between 18 to 55 years old
- Certified with Sijil Pelajaran Malaysia (SPM) with credit in 3 subjects (Mathematic, Physics and English)
- Preferable Diploma holder in Engineering /Technology
- Pass the Pre-course Test and program admission interview
- Physically fit and and pass color eye test
- At least six (6) months working experience in related field as per below schedule :
ULTRASONIC TESTING THICKNESS MEASUREMENT (UTTM)
Course Information
Ultrasonic Testing Thickness Measurement (UTTM) is one of the Non-Destructive Testing (NDT) methods used for detection of defects (lamination or corrosion) inside materials or thickness check by the use of compression probe. The Ultrasonic Testing method uses acoustic waves which have the capability to propagate through a material and be reflected on its boundary. It employs ultrasonic test sets and various probes. This method is one of volumetric methods (can test full material volume). It belongs to the group of conventional NDT methods.
During the course the candidate will gain a comprehensive understanding of Ultrasonic Testing that will enable them to implement this method competently.
Course content
- Introduction of terminology and history of NDT
- Physical properties of the ultrasonic testing and associated knowledge
- Product knowledge; capabilities of ultrasonic testing method and its derivate techniques
- Ultrasonic Testing Equipment
- Information prior to the test
- Preparation and performance of the test
- Test report (preparation and check) and written procedure
- Evaluation and reporting
- Assessment
- Quality aspects
Training Program
Magnetic Testing (MT)
Penetrant Testing (PT)
Ultrasonic Testing Thickness Measurement (UTTM)
Ultrasonic Testing in Welds (UT)
Radiographic Interpretation (RI)
Pre-Requisites
- Malaysian age between 18 to 55 years old
- Certified with Sijil Pelajaran Malaysia (SPM) with credit in 3 subjects (Mathematic, Physics and English)
- Preferable Diploma holder in Engineering /Technology
- Pass the Pre-course Test and program admission interview
- Physically fit and and pass color eye test
- At least six (6) months working experience in related field as per below schedule :
ULTRASONIC TESTING (UT)
Course Information
Ultrasonic Testing (UT) is one of the non-destructive testing (NDT) methods used for detection of defects inside materials or welds by the use of compression and shear probe. The Ultrasonic Testing method uses acoustic waves which have the capability to propagate through a material and be reflected on its boundary. It employs ultrasonic test sets and various probes. This method is one of volumetric methods (can test full material volume). It belongs to the group of conventional NDT methods.
During the course the candidate will gain a comprehensive understanding of Ultrasonic Testing that will enable them to implement this method competently. This will be achieved through both theory lessons focused on aspects of practical application of UT and practical exercises on test specimens, with emphasis on interpretation of defect indications.
Course content
- Introduction of terminology and history of NDT
- Physical properties of the ultrasonic testing and associated knowledge
- Product knowledge; capabilities of ultrasonic testing method and its derivate techniques
- Ultrasonic Testing Equipment
- Information prior to the test
- Preparation and performance of the test
- Test report (preparation and check) and written procedure
- Evaluation and reporting
- Assessment
- Quality aspects
Training Program
Magnetic Testing (MT)
Penetrant Testing (PT)
Ultrasonic Testing Thickness Measurement (UTTM)
Ultrasonic Testing in Welds (UT)
Radiographic Interpretation (RI)
Pre-Requisites
- Malaysian age between 18 to 55 years old
- Certified with Sijil Pelajaran Malaysia (SPM) with credit in 3 subjects (Mathematic, Physics and English)
- Preferable Diploma holder in Engineering /Technology
- Pass the Pre-course Test and program admission interview
- Physically fit and and pass color eye test
- At least six (6) months working experience in related field as per below schedule :
RADIOGRAPHIC INTERPRETATION (RI)
Course Information
Radiographic Interpreter (RI) is a limited qualification related to radiographic testing, a method used for detection of internal material defects. The qualified Radiographic Interpreter should have the skill to interpret and evaluate a radiographic image in term of image quality as well as object acceptability. This includes being able to identify indications correctly, recognize the nature of a defect, measure relevant dimensions and record position so that if the defect is considered unacceptable, it may be located on the object and remedial action taken.
During the course the candidate will gain a comprehensive understanding of the Radiographic Testing method that will enable them to understand radiographic images.
Course content
- Introduction of terminology and history of NDT
- Physical properties of the radiographic testing and associated knowledge
- Geometry for radiographic exposures
- Product knowledge; capabilities of radiographic testing method and its derivate techniques
- Design and operation of X-ray machines and Gamma ray devices
- Developing process
- Examination of welded joints according to ISO standards
- Image quality
- Test report (preparation and check)
- Evaluation and reporting
- Assessment and Quality aspects
Training Program
Magnetic Testing (MT)
Penetrant Testing (PT)
Ultrasonic Testing Thickness Measurement (UTTM)
Ultrasonic Testing in Welds (UT)
Radiographic Interpretation (RI)
Pre-Requisites
- Malaysian age between 18 to 55 years old
- Certified with Sijil Pelajaran Malaysia (SPM) with credit in 3 subjects (Mathematic, Physics and English)
- Preferable Diploma holder in Engineering /Technology
- Pass the Pre-course Test and program admission interview
- Physically fit and and pass color eye test
- At least six (6) months working experience in related field as per below schedule :
Blasting & Painting Operator
During the course, the candidates will gain a comprehensive understanding of safety rules and risk assessment, equipment checks, material and consumables, personal protective equipment required, set up equipment and proper techniques of blasting and painting. The certification will be executed in accordance with NOSS Standard F433-004-2.
BLASTING PAINTING OPERATOR (BPO)
Course content
- Blasting Preparation
- Abrasive blasting operation
- Blasting material and equipment storage handling
- Painting preparation
- Protective coating and painting
- Painting material and equipment storage handling
Pre-Requisites
- Malaysia age between 18 to 55 years old
- Own a valid Kad Pendaftaran Personel Binaan (Pekerja Binaan Am, Pekerja Binaan Separuh Mahir atau Pekerja Binaan Mahir)
- Able to read and write
- At least six (6) months working experience in related field
- Physically fit and pass color eye test
Skills Competency Assessment Program
Welding
Non-Destructive Testing
Blasting & Painting
Welding
Welding program is designed to help create a skilled and competent workforce. Our training covers the main arc welding processes that are used by industry including SMAW, GTAW, GMAW and FCAW. Welder qualification tests are witnessed by CIDB approved welding examiners and conducted in line with recognized international standards.
SHIELDED METAL ARC WELDING (SMAW)
Course Information
During the course, the candidates will gain a comprehensive understanding in welding safety with an overview of basic weld symbols, SMAW electrode types and selection, classification of electrodes, power sources and polarity.
Course content
- Introduction to workplace / workshop safety and health practice and basic first aid
- Arc welding safety
- Shielded Metal Arc Welding (SMAW) process
- Welding simulator training
- Welding consumable
- Welding imperfection, residual stress and distortion
- Welding terminology and definition
- Welding procedure specification (WPS)/ welder qualification
- Welding symbol
Welding Courses Offered
Level 1 – 1F, 1G, 2F, 2G, 3F, 4F
Level 2 – 3G, 4G
Level 3 – 5G, 6G, 6GC, 6GR
Pre-Requisites
- Malaysia age between 18 to 55 years old
- Own a valid Kad Pendaftaran Personel Binaan (Pekerja Binaan Am, Pekerja Binaan Separuh Mahir atau Pekerja Binaan Mahir)
- Able to read, write and count
- At least six (6) months working experience in related field or certified in 1G/2G Welding for Level 2 or certified in 3G Welding for Level 3 from technical colleges or industry
- Medically and physically fit
GAS TUNGSTEN ARC WELDING (GTAW)
Course Information
During the course, the candidates will gain a comprehensive understanding in GTAW welding safety and the GTAW processes. This includes acquiring the knowledge of power sources and polarities, principles of operation, welding techniques, electrode identification and use, filler metal identification and use, welding code, and maintenance of GTAW equipment and accessories.
Course content
- Introduction to workplace / workshop safety and health practice and basic first aid
- Arc welding safety
- Gas Tungsten Arc Welding (GTAW) process
- Welding simulator training
- Welding consumable
- Welding imperfection, residual stress and distortion
- Welding terminology and definition
- Welding procedure specification (WPS)/ welder qualification
- Welding symbol
Welding Courses Offered
Level 1 – 1F, 1G, 2F, 2G, 3F, 4F
Level 2 – 3G, 4G
Level 3 – 5G, 6G, 6GC
Pre-Requisites
- Malaysia age between 18 to 55 years old
- Own a valid Kad Pendaftaran Personel Binaan (Pekerja Binaan Am, Pekerja Binaan Separuh Mahir atau Pekerja Binaan Mahir)
- Able to read, write and count
- At least six (6) months working experience in related field or certified in 1G/2G Welding for Level 2 or certified in 3G Welding for Level 3 from technical colleges or industry
- Medically and physically fit
GAS METAL ARC WELDING (GMAW)
Course Information
During the course, the candidates will gain a comprehensive understanding in GMAW welding safety and the GMAW processes. This includes acquiring the knowledge of power sources and polarities, principles of operation, welding techniques, modes of filler metal transfer, filler metal identification and use, welding code, and maintenance of GMAW equipment.
Course content
- Introduction to workplace / workshop safety and health practice and basic first aid
- Arc welding safety
- Gas Metal Arc Welding (GMAW) process
- Welding simulator training
- Welding consumable
- Welding imperfection, residual stress and distortion
- Welding terminology and definition
- Welding procedure specification (WPS)/ welder qualification
- Welding symbol
Welding Courses Offered
Level 1 – 1F, 1G, 2F, 2G, 3F, 4F
Level 2 – 3G, 4G
Level 3 – 5G, 6G
Pre-Requisites
- Malaysia age between 18 to 55 years old
- Own a valid Kad Pendaftaran Personel Binaan (Pekerja Binaan Am, Pekerja Binaan Separuh Mahir atau Pekerja Binaan Mahir)
- Able to read, write and count
- At least six (6) months working experience in related field or certified in 1G/2G Welding for Level 2 or certified in 3G Welding for Level 3 from technical colleges or industry
- Medically and physically fit
FLUX CORED ARC WELDING (FCAW)
Course Information
During the course, the candidates will gain a comprehensive understanding in FCAW welding safety and the FCAW process. This includes acquiring the knowledge and techniques of flux cored arc welding, both self-shielded and gas-shielded, power sources and polarities, principles of operation, welding techniques, modes of filler metal transfer, filler metal identification and use, code welding, and maintenance of FCAW equipment.
Course content
- Introduction to workplace / workshop safety and health practice and basic first aid
- Arc welding safety
- Flux Cored Arc Welding (FCAW) process
- Welding simulator training
- Welding consumable
- Welding imperfection, residual stress and distortion
- Welding terminology and definition
- Welding procedure specification (WPS)/ welder qualification
- Welding symbol
Welding Courses Offered
Level 1 – 1F, 1G, 2F, 2G, 3F, 4F
Level 2 – 3G, 4G
Level 3 – 5G, 6G
Pre-Requisites
- Malaysia age between 18 to 55 years old
- Own a valid Kad Pendaftaran Personel Binaan (Pekerja Binaan Am, Pekerja Binaan Separuh Mahir atau Pekerja Binaan Mahir)
- Able to read, write and count
- At least six (6) months working experience in related field or certified in 1G/2G Welding for Level 2 or certified in 3G Welding for Level 3 from technical colleges or industry
- Medically and physically fit
Non-Destructive Testing
The program offers intensive practical training together with strong theoretical foundation that enables personnel to achieve a solid understanding of Non-destructive testing program. Designed to create competent NDT personnel in methods of PT, MT, RI and UT in accordance with ISO 9712.
PENETRANT TESTING (PT)
Course Information
Penetrant Testing (PT) is one of the non-destructive testing methods used for the detection of surface breaking imperfections. The Penetrant Testing method is based on the capillary action of liquids. It employs various chemicals which must be used in accordance with a prescribed procedure. This method is known for its simplicity and relative effectiveness. It belongs to the group of conventional NDT methods.
During the course, the candidates will gain a comprehensive understanding of Penetrant Testing principles that will enable them to implement this method competently.
Course content
- Introduction of terminology and history of NDT
- Physical properties of the penetrant and associated knowledge
- Typical defects according to the manufacturing process
- Design and operation of penetrant installations and units
- Verification that the test object is in suitable condition for penetrant testing
- Preparation and performance of the test
- Test report (preparation and check) and written procedure
- Assessment of discontinuities
- Environmental and safety conditions
Training Program
Magnetic Testing (MT)
Penetrant Testing (PT)
Ultrasonic Testing Thickness Measurement (UTTM)
Ultrasonic Testing in Welds (UT)
Radiographic Interpretation (RI)
Pre-Requisites
- Malaysian age between 18 to 55 years old
- Certified with Sijil Pelajaran Malaysia (SPM) with credit in 3 subjects (Mathematic, Physics and English)
- Preferable Diploma holder in Engineering /Technology
- Pass the Pre-course Test and program admission interview
- Physically fit and and pass color eye test
- At least six (6) months working experience in related field as per below schedule :
MAGNETIC TESTING (MT)
Course Information
Magnetic Particle Testing (MT) is one of the Non-Destructive Testing (NDT) methods used for the detection of surface or subsurface imperfections. The Magnetic Particle Testing method is based on the ability of a material to be magnetized. Material discontinuities (if oriented suitably) may lead to magnetic flux leakage that forms an indication. This method is known for its speed, productivity, and relative accuracy. It belongs to the group of conventional NDT methods.
During the course candidates will gain a comprehensive understanding of Magnetic Particle Testing principles that will enable them to implement this method competently.
Course content
- Introduction of terminology and history of NDT
- Physical properties of the magnetic testing and associated knowledge
- Product knowledge; capabilities of magnetic testing method and its derivate techniques
- Magnetic Testing Equipment
- Information prior to the test
- Preparation and performance of the test
- Test report (preparation and check) and written procedure
- Evaluation and reporting
- Assessment
- Quality aspects
- Environmental and Safety conditions
Training Program
Magnetic Testing (MT)
Penetrant Testing (PT)
Ultrasonic Testing Thickness Measurement (UTTM)
Ultrasonic Testing in Welds (UT)
Radiographic Interpretation (RI)
Pre-Requisites
- Malaysian age between 18 to 55 years old
- Certified with Sijil Pelajaran Malaysia (SPM) with credit in 3 subjects (Mathematic, Physics and English)
- Preferable Diploma holder in Engineering /Technology
- Pass the Pre-course Test and program admission interview
- Physically fit and and pass color eye test
- At least six (6) months working experience in related field as per below schedule :
ULTRASONIC TESTING THICKNESS MEASUREMENT (UTTM)
Course Information
Ultrasonic Testing Thickness Measurement (UTTM) is one of the Non-Destructive Testing (NDT) methods used for detection of defects (lamination or corrosion) inside materials or thickness check by the use of compression probe. The Ultrasonic Testing method uses acoustic waves which have the capability to propagate through a material and be reflected on its boundary. It employs ultrasonic test sets and various probes. This method is one of volumetric methods (can test full material volume). It belongs to the group of conventional NDT methods.
During the course the candidate will gain a comprehensive understanding of Ultrasonic Testing that will enable them to implement this method competently.
Course content
- Introduction of terminology and history of NDT
- Physical properties of the ultrasonic testing and associated knowledge
- Product knowledge; capabilities of ultrasonic testing method and its derivate techniques
- Ultrasonic Testing Equipment
- Information prior to the test
- Preparation and performance of the test
- Test report (preparation and check) and written procedure
- Evaluation and reporting
- Assessment
- Quality aspects
Training Program
Magnetic Testing (MT)
Penetrant Testing (PT)
Ultrasonic Testing Thickness Measurement (UTTM)
Ultrasonic Testing in Welds (UT)
Radiographic Interpretation (RI)
Pre-Requisites
- Malaysian age between 18 to 55 years old
- Certified with Sijil Pelajaran Malaysia (SPM) with credit in 3 subjects (Mathematic, Physics and English)
- Preferable Diploma holder in Engineering /Technology
- Pass the Pre-course Test and program admission interview
- Physically fit and and pass color eye test
- At least six (6) months working experience in related field as per below schedule :
ULTRASONIC TESTING (UT)
Course Information
Ultrasonic Testing (UT) is one of the non-destructive testing (NDT) methods used for detection of defects inside materials or welds by the use of compression and shear probe. The Ultrasonic Testing method uses acoustic waves which have the capability to propagate through a material and be reflected on its boundary. It employs ultrasonic test sets and various probes. This method is one of volumetric methods (can test full material volume). It belongs to the group of conventional NDT methods.
During the course the candidate will gain a comprehensive understanding of Ultrasonic Testing that will enable them to implement this method competently. This will be achieved through both theory lessons focused on aspects of practical application of UT and practical exercises on test specimens, with emphasis on interpretation of defect indications.
Course content
- Introduction of terminology and history of NDT
- Physical properties of the ultrasonic testing and associated knowledge
- Product knowledge; capabilities of ultrasonic testing method and its derivate techniques
- Ultrasonic Testing Equipment
- Information prior to the test
- Preparation and performance of the test
- Test report (preparation and check) and written procedure
- Evaluation and reporting
- Assessment
- Quality aspects
Training Program
Magnetic Testing (MT)
Penetrant Testing (PT)
Ultrasonic Testing Thickness Measurement (UTTM)
Ultrasonic Testing in Welds (UT)
Radiographic Interpretation (RI)
Pre-Requisites
- Malaysian age between 18 to 55 years old
- Certified with Sijil Pelajaran Malaysia (SPM) with credit in 3 subjects (Mathematic, Physics and English)
- Preferable Diploma holder in Engineering /Technology
- Pass the Pre-course Test and program admission interview
- Physically fit and and pass color eye test
- At least six (6) months working experience in related field as per below schedule :
RADIOGRAPHIC INTERPRETATION (RI)
Course Information
Radiographic Interpreter (RI) is a limited qualification related to radiographic testing, a method used for detection of internal material defects. The qualified Radiographic Interpreter should have the skill to interpret and evaluate a radiographic image in term of image quality as well as object acceptability. This includes being able to identify indications correctly, recognize the nature of a defect, measure relevant dimensions and record position so that if the defect is considered unacceptable, it may be located on the object and remedial action taken.
During the course the candidate will gain a comprehensive understanding of the Radiographic Testing method that will enable them to understand radiographic images.
Course content
- Introduction of terminology and history of NDT
- Physical properties of the radiographic testing and associated knowledge
- Geometry for radiographic exposures
- Product knowledge; capabilities of radiographic testing method and its derivate techniques
- Design and operation of X-ray machines and Gamma ray devices
- Developing process
- Examination of welded joints according to ISO standards
- Image quality
- Test report (preparation and check)
- Evaluation and reporting
- Assessment and Quality aspects
Training Program
Magnetic Testing (MT)
Penetrant Testing (PT)
Ultrasonic Testing Thickness Measurement (UTTM)
Ultrasonic Testing in Welds (UT)
Radiographic Interpretation (RI)
Pre-Requisites
- Malaysian age between 18 to 55 years old
- Certified with Sijil Pelajaran Malaysia (SPM) with credit in 3 subjects (Mathematic, Physics and English)
- Preferable Diploma holder in Engineering /Technology
- Pass the Pre-course Test and program admission interview
- Physically fit and and pass color eye test
- At least six (6) months working experience in related field as per below schedule :
Blasting & Painting Operator
During the course, the candidates will gain a comprehensive understanding of safety rules and risk assessment, equipment checks, material and consumables, personal protective equipment required, set up equipment and proper techniques of blasting and painting. The certification will be executed in accordance with NOSS Standard F433-004-2.
BLASTING PAINTING OPERATOR (BPO)
Course content
- Blasting Preparation
- Abrasive blasting operation
- Blasting material and equipment storage handling
- Painting preparation
- Protective coating and painting
- Painting material and equipment storage handling
Pre-Requisites
- Malaysia age between 18 to 55 years old
- Own a valid Kad Pendaftaran Personel Binaan (Pekerja Binaan Am, Pekerja Binaan Separuh Mahir atau Pekerja Binaan Mahir)
- Able to read and write
- At least six (6) months working experience in related field
- Physically fit and pass color eye test